Specification

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
51B 99043475C
ALLURE
TM
RANGE HOOD
MODELS WS1, WS2, & WS3
Meeting customer demands for a contemporary styled
range hood that is 50% quieter than average hoods, is
easy to clean, and brightly lights the cooktop.
FEATURES
• Clean, sleek appearance
• Durable, baked-on polyester finish paint or brushed finish
stainless steel
• Over 50% quieter than the average range hood
• Non-stick bottom cover for easy cleaning (WS2 & WS3)
• Large, full filter design - dishwasher-safe for easy cleaning
• Dual halogen lights provide focused lighting for unmatched
cooktop visibility as well as a soft, night-time level (lamps
not included)
• Axial blade (WS1) or centrifugal blower (WS2 & WS3) provides
increased performance and quieter operation.
• Flush-mounted controls
• Versatile design allows for 3¼" x 10", 7" round, or non-ducted
discharges without re-positioning blower
• Adjustable duct connectors - accommodate off-center ductwork
• CleanSense™ charcoal filters indicate when replacement is
necessary (for non-ducted installations - purchase separately)
• Available in 30", 36", or 42" widths in White, Biscuit, Almond,
Black, and Stainless Steel
• Bi-lingual carton graphics and installation manual (English/
Spanish)
• Heat Sentry™ - automatically turns blower to high (WS2),
on or higher (WS3) when excess cooking heat is detected
TYPICAL SPECIFICATION
Range hood shall be NuTone WS1 (WS2) (WS3) Series.
Unit will have clean, contoured appearance with no sharp edges.
Finish to be baked-on polyester paint (matte finish stainless
steel). It must have a fully-enclosed bottom and dishwasher-
safe, full filters.
Hood to be convertible between 3¼" x 10" and 7" round ducted
(using two washable aluminum filters) as well as non-ducted
(using two CleanSense™ filters - must be purchased separately).
Duct connectors must be adjustable to accommodate off-center
ductwork.
Range hood to have an axial blade (centrifugal blower) and twin,
50-watt (max.) halogen flood lights. Blower and lights shall be
operated using a specially-designed, adjustable control with
2-speed rocker (3-speed electronic push button) (4-speed elec-
tronic, with delayed "off" and filter reminder).
Air delivery shall be no less than 220 cfm (WS1), 300 cfm
(WS2), 430 cfm (WS3). Sound level to be no greater than 1.5
Sones/100 cfm - 5.0 Sones/220 cfm (WS1); 0.9 Sones/100 cfm
- 4.5 Sones/300 cfm (WS2); 0.4 Sones/100 cfm - 4.5 Sones/300
cfm - 8.0 Sones/430 cfm in "Boost" mode (WS3). Air and sound
ratings to be certified by HVI. Unit shall be U.L. listed.
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
WS1 WS2 WS3
Volts 120 120 120
HZ 60 60 60
Amps 1.8 2.0 3.0
Max. cfm 220 300 300*
Sones (norm.) 1.5 0.9 0.4*
Sones (high) 5.0 4.5 4.5
Controls 2-sp rocker 3-sp electronic 4-sp electronic
Halogen Flood Light PAR20
†
PAR20
†
PAR20
†
Charcoal Filter BPSF
‡
BPSF
‡
BPSF
‡
Non-Stick Bottom No Yes Yes
Heat Sentry™ No Yes Yes
* 430 cfm & 8.0 sones in Boost mode (WS3 only).
†
2 bulbs req. (not included).
‡
Purchase separately for non-ducted installation.
SPECIFICATIONS MODEL
HVI-2100 CERTIFIED
RATINGS comply with
new testing technologies and procedures prescribed by the Home Ventilating Institute,
for off-the-shelf products, as they are available to consumers. Product performance
is rated at 0.1 in. static pressure, based on tests conducted in a state-of-the-art
test laboratory. Sones are a measure of humanly-perceived loudness, based on
laboratory measurements.