Quick Start Manual

25
wire/string to temporarily hold the pipe and elbow in
place, insert the VacuSweep
®
Inlet Valve into the opening
at the base of the wall and elbow. DO NOT glue this
connection (Designed for friction fit). See Figure 50-5.
6. Remove the wire/string. With the door in an open
position, secure the VacuSweep
®
Inlet Valve to the wall
using no. 6 screws. See Figure 50-6. Ensure that the
spring on the electrical connector has 1/8” clearance
to rough opening. Continue with remainder of central
vacuum connections. When the vacuum system is
complete, turn the power to the vacuum unit on.
AD0047A
FIGURE 50
AR0036
VacuSweep
®
Inlet Valve
Rough-in Template