Specification

PERFORMANCE RATINGS
MODEL QTXEN110SFLT FAN / LIGHT / NIGHT LIGHT
AMPS
Model Amps*
QTXEN110HFLT 1.0
WEIGHT
Model
Shipping
Weight
QTXEN110HFLT 13.8 lbs.
* Total connected load
AIR FLOW PERFORMANCE
TYPICAL SPECIFICATION
Fan shall be NuTone Model QTXEN110HFLT.
The unit shall have a control that will automatically turn fan ON when
humidity increase is rapid to moderate (user adjustable), or when humidity
is higher than user-adjustable set-point (50%-80% Relative Humidity),
or when supply power is cycled from ON (for more than a second) to
OFF (for less than a second) and back ON. It shall be user-adjustable to
turn OFF 5 to 60 minutes after humidity has stabilized and is below user-
adjustable set-point, or after manually initiated by supply power cycling.
Fan shall have corrosion resistant galvanized steel housing with four-
point mounting capability. It shall be ducted to a roof or wall cap using
6” round ductwork.
Blower assembly shall be removable, have a centrifugal-type blower wheel and
a permanently lubricated motor designed for continuous operation.
Non-metallic damper/duct connector shall be included.
Bulbs shall be (2) 18W (max.) high-efficiency, GU24 based, fluorescents and
separate 4W (max.), type C7 night light bulb.
Air delivery shall be no less than 110 CFM and sound level no greater than
0.7 Sones. All air and sound ratings shall be certified by HVI.
Fan shall be ENERGY STAR® qualified and have an energy efficient permanent
split capacitor motor.
Fan shall be U.L. Listed for use over bathtubs and showers when connected
to a GFCI protected branch circuit (ceiling mount only).
Fan shall be U.L. Listed for use in insulated ceilings (Type I.C.).
Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 888-336-3948
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they
are available to consumers. Product performance is rated
at 0.1 in. static pressure, based on tests conducted in
a state-of-the-art test laboratory. Sones are a measure
of humanly-perceived loudness, based on laboratory
measurements.
HVI PERFORMANCE
Static Fan
Model
Pressure (Ps)
CFM Sones
Watts
QTXEN110HFLT
0.10 110 0.7 31.4
0.25 86 33.0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 10 20 30 40 50 60 70 80 90 100 110 120 130
Static Pressure (in. w.g.)
Airflow (CFM)
MODEL QTXEN110HFLT