Specification Sheet

NuTone, Inc., 4820 Red Bank Road, Cincinnai, OH 45227 (1-800-543-8687)
PERFORMANCE RATINGS
QTXEN SERIES FANS
Sones
*
CFM
Model @0.1” Ps @0.1” Ps
QTXEN050 < 0.3 50
QTXEN080 0.4 80
QTXEN110 1.1 110
QTXEN150 1.4 150
AMPS
Model Amps
QTXEN050 0.3
QTXEN080 0.4
QTXEN110 0.3
QTXEN150 0.5
"NuTone certifies that the models shown herein are licensed
to bear the AMCA Seal. The ratings shown are based on
tests and procedures performed in accordance with AMCA
Publication 211 and AMCA Publication 311 and comply with
the requirements of the AMCA Certified Ratings Program."
WEIGHT
Sones
*
CFM @ Static Pressure Ps (in. w.g.)
Model @ 0.0'’ Ps 0.0" 0.1" 0.25" Volts Hz Watts RPM Duct Size
QTXEN050 0.4 70 56 42 120 60 27 600 6" Diameter
QTXEN080 0.6 94 82 69 120 60 39 650 6" Diameter
QTXEN110 1.9 130 115 102 120 60 36 700 6" Diameter
QTXEN150 2.3 160 151 134 120 60 53 770 6" Diameter
Performance shown is for installation type B - Free inlet, Ducted outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Performance ratings
include the effects of supplied inlet grille and backdraft damper in the airstream. The sound ratings shown are loudness values in fan sones at 5' (1.5m) in a hemispherical
free field calculated per AMCA Std. 301. Values shown are for installation Type B: free inlet fan sone levels.
AMCA LICENSED PERFORMANCE
HVI-2100 CERTIFIED RATINGS comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute,
for off-the-shelf products, as they are available
to consumers. Product performance is rated at
0.1 in. static pressure, based on tests conducted
in AMCA’s state-of-the-art test laboratory.
Sones are a measure of humanly-perceived
loudness, based on laboratory measurements.
*
There is a difference between sone values certified by HVI for
residential use and by AMCA for commercial/industrial use. Exact
comparison of these values is not possible. This difference is mainly
due to the procedures used to convert measured sound to perceived
sound. ANSI S3.4, used by both HVI and AMCA, specifies a procedure
for calculating loudness as perceived by a typical listener under specific
conditions. HVI establishes values at a distance of 5 feet from the fan
in a “spherical free field’’; AMCA establishes values at a distance of 5
feet in a "hemispherical free field".
HVI PERFORMANCE
Model Shipping
Weight
QTXEN050 12.8 lbs.
QTXEN080 12.8 lbs.
QTXEN110 12.4 lbs.
QTXEN150 12.8 lbs