Spec Sheet

ManualsBrandsNuTone ManualsKitchenQTX Series Very Quiet 80 CFM Ceiling Exhaust Bath Fan, ENERGY STAR Qualified

Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 888-336-3948

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

Architectural & Engineering Specifications

February 2016

QTXEN Series

Fans

MODELS QTXEN080, QTXEN110

ARCHITECT’S SPECIFICATION

• Fan shall be NuTone Model QTXEN080 (QTXEN110).

• Fan shall have corrosion resistant galvanized steel housing with

four-point mounting capability. It shall be ducted to a roof or wall

cap using 6” round ductwork.

• Blower assembly shall be removable, have a centrifugal-type

blower wheel and a permanently lubricated motor designed for

continuous operation.

• Non-metallic damper/duct connector shall be included.

• Air delivery shall be no less than 80 (110) CFM and sound level

no greater than 0.3 (0.7) Sones. All air and sound ratings shall

be certified by HVI.

• Fan shall be ENERGY STAR® qualified and have an energy

efficient permanent split capacitor motor.

• Fan shall be U.L. Listed for use over bathtubs and showers when

connected to a GFCI protected branch circuit (ceiling mount only).

61B 99045464B

DESCRIPTION

BLOWER:

• Plug-in, permanently lubricated motor - engineered for

continuous operation

• Dynamically balanced centrifugal blower wheel for quiet,

efficient performance

• Maintains a high percentage of rated CFM in less than ideal

installations

• Low RPM for quiet operation

HOUSING:

• Rugged, 26 gauge, galvanized steel construction

• 6” round ducting for superior performance

• Polymeric duct connector with tapered sleeve and no metallic

clatter

• 7-5/8” height allows for 2” x 8” (nominal) joist installations

• Sturdy, easy, four-point mounting directly to joist

• Includes unique, patented spacer for mounting to engineered

“I” joists

• Includes hanger bars to position housing anywhere between

16” to 24”-on-center joists

• Two sets of mounting holes for hanger bars allow flush

installation with bottom or top of drywall

• Can be mounted in ceilings up to 12/12 pitch

GRILLE:

• Polymeric construction

• Innovative design - the result of extensive research with

designers and consumers

CONTROLS (Purchase separately):

• Refer to NuTone’s catalog for a complete line of accessories to

effectively adapt these fans to your construction requirements.

U.L. Listed for use over bathtubs and showers when connected to

a GFCI protected branch circuit (ceiling mount only).

3-Year Warranty

Summary of content (2 pages)

PAGE 1
Architectural & Engineering Specifications February 2016 QTXEN Series Fans DESCRIPTION BLOWER: • Plug-in, permanently lubricated motor - engineered for continuous operation • Dynamically balanced centrifugal blower wheel for quiet, efficient performance • Maintains a high percentage of rated CFM in less than ideal installations • Low RPM for quiet operation MODELS QTXEN080, QTXEN110 HOUSING: • Rugged, 26 gauge, galvanized steel construction • 6” round ducting for superior performance • Polymeric duct co
PAGE 2
PERFORMANCE RATINGS QTXEN SERIES FANS AIR FLOW PERFORMANCE Static Model Pressure (Ps) CFM Sones Watts 0.10 80 0.3 23.3 QTXEN080 0.25 56 0.10 110 0.7 31.4 QTXEN110 0.25 86 HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted in a state-of-the-art test laboratory.