Spec Sheet

ManualsBrandsNuTone ManualsCooling & Air QualityDISCONTINUED: NuTone® QT 130 CFM Ventilation Fan, ENERGY STAR®

Broan-NuTone Canada ULC, Mississauga, Ontario www.nutone.ca 1-888-882-7626

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

Architectural & Engineering Specifications

October 2015

Model QTN130EC

Fan

ARCHITECT’S SPECIFICATION

• Fan shall be NuTone Model QTN130EC.

• Fan shall have corrosion resistant galvanized steel housing with

four-point mounting capability. It shall be ducted to a roof or wall

cap using 6” round or 4” round ductwork.

• Blower assembly shall be removable, have a centrifugal-type blower

wheel, a permanently lubricated motor designed for continuous

operation.

• 6” round damper/duct connector and 6” round to 4” round duct

reducer shall be included.

• Air delivery shall be no less than 130 CFM and sound level no

greater than 1.5 sones when using 6” duct connector (130 CFM

/ 2.0 sones when using 6” round to 4” round duct reducer). All air

and sound ratings shall be certified by HVI.

• Fan shall be Energy Star

qualified and have an energy efficient

permanent split capacitor motor.

• Fan shall be cULus listed for use over bathtubs and showers when

connected to a GFCI protected branch circuit.

QTN130ECd151022

DESCRIPTION

BLOWER:

• Plug-in, permanently lubricated motor - engineered for

continuous operation

• Dynamically balanced centrifugal blower wheel for quiet,

efficient performance

• Low RPM for quiet operation

• Airflow-smoothing baffles reduce turbulence

HOUSING:

• Rugged, 26-gauge galvanized steel construction

• 6” round duct connector with tapered sleeve and no metallic

clatter

• 6” round to 4” round duct reducer included - allows connection

of 4” round ductwork

• 7-5/8” height allows for 2” x 8” (nominal) joist installations

• Sturdy, easy, four-point mounting directly to joist

• Includes unique spacer (patented) for mounting to engineered

“I” joists

• Can be mounted in ceilings up to 12/12 pitch

GRILLE:

• Polymeric construction

• Innovative design - the result of extensive research with

designers and consumers

CONTROLS (Purchase separately):

• Refer to NuTone’s catalog for a complete line of accessories to

effectively adapt this fan to your construction requirements.

cULus listed for use over bathtubs and showers when connected to

a GFCI protected branch circuit (ceiling mount only).

3-Year Waranty

PRODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Summary of content (2 pages)

PAGE 1
Architectural & Engineering Specifications October 2015 DESCRIPTION BLOWER: • Plug-in, permanently lubricated motor - engineered for continuous operation • Dynamically balanced centrifugal blower wheel for quiet, efficient performance • Low RPM for quiet operation • Airflow-smoothing baffles reduce turbulence Model QTN130EC Fan HOUSING: • Rugged, 26-gauge galvanized steel construction • 6” round duct connector with tapered sleeve and no metallic clatter • 6” round to 4” round duct reducer included - allo
PAGE 2
PERFORMANCE RATINGS MODEL QTN130EC FAN HVI PERFORMANCE Model Static Pressure (Ps) 0.10 QTN130EC CFM Sones 130 1.5 Fan Watts 37.1 2.0 37.1 0.25 114 0.10 130 0.25 114 Duct with 6” round duct connector with 6” round to 4” round duct reducer HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers. Product performance is rated at 0.1 in.