Instructions / Assembly

2. Disengage the small grease guard cups from the metal guards by turning counterclockwise and remove.

3. Remove the screw retaining the metal guards to the hood.

4. Remove the metal guards from the hood. Then remove the bottom panel.

5. Unscrew the clips and remove the wheel grease collector.

6. Remove the wheel center cap.

7. Loosen the wheel set screw in order to disengage the wheel from its motor shaft.

Let soak all removed parts in warm water with soft soap for 30 minutes. Rinse and dry completely before reinstalling.

HD0142

HD0143

HD0144

HD0146

HD0147

234

-9-

7. CLEANING AND MAINTENANCE

HD0145

NOTE: When reinstalling the wheel, align the end of the set screw with the flat part of the

motor shaft.

HD0148

MOTOR SHAFT

1. Slide out main grease cup.

HO0171