Installation Guide
MODEL NSP130
Page 4
5 RemoveVertical Duct KnockoutorHorizontal Duct
KnockoutandattachDamper / Duct Connectorwith
two(2)screws(supplied).
VERTICALDUCT
KNOCKOUT
HORIZONTALDUCT
KNOCKOUT
DAMPER/
DUCT
CONNECTOR
INSTALL THE HOOD
WARNING
Toreducetheriskofelectricalshock,switchpoweroff
atservicepanel.Lockortagservicepaneltoprevent
powerfrombeingswitchedonaccidentally.
6 Run House Power Cable between service panel and
hoodlocation.Attachpowercabletohoodusingappropri-
ateconnector.
7 Holdthehoodinpositionunderthecabinet.Makesure
the damper / duct connector enters the Ductwork and
thatthedamperopensandclosesfreely.
8 Tightenthefour(4)Mounting Screwscompletelytose-
curethehoodtothecabinet.
HOUSE
POWER
CABLE
MOUNTING
SCREWS(4)
DUCTWORK
CONNECT THE WIRING
HE0059
9 Connect House Power Cable to range hood wiring
-BLACKtoBLACK,WHITEtoWHITE,and GREENor
BAREWIREtoGREEN Ground Screw.
HOUSE
POWER
CABLE
GREEN
GROUND
SCREW
10 Re-installthewiringcover,bottomcover,andltersthat
wereremovedinStep3.
COMPLETE INSTALLATION
11 InstallHalogen Bulbs.Use120V,50W,shieldedhalo-
genbulbs-MR16orPAR16withGU10base.Purchase
bulbsseparately.
INSTALL LIGHT BULBS
(1)PUSHIN
(2)ROTATE
CLOCKWISE