Specification Sheet

Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 888-336-6151
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
SPECIFICATION SHEET
41K 99044966D
MODEL LPN80
LO PROFILE
VENTILATION FAN
TYPICAL SPECIFICATION
• Fan shall be NuTone Model LPN80.
• Fan shall have corrosion resistant galvanized steel housing.
It shall be ducted to a roof or wall cap using 4” or 3" round
ductwork.
• Blower assembly shall be removable, have a centrifugal-
type blower wheel and a permanently lubricated motor
designed for continuous operation.
• Metal damper/duct connector shall be included.
• Air delivery shall be no less than 80 CFM and sound level
no greater than 1.0 Sones. All air and sound ratings shall
be certified by HVI.
• Fan shall be ENERGY STAR
®
qualified and have an energy
efficient permanent split capacitor motor.
• Fan shall be U.L. Listed for use over bathtubs and showers
when connected to a GFCI protected branch circuit (ceiling
mount only).
DESCRIPTION
BLOWER:
• Plug-in, permanently lubricated motor - engineered for
continuous operation
• Dynamically balanced centrifugal blower wheel for
quiet, efficient performance
• Low RPM for quiet operation
HOUSING:
• Rugged, galvanized steel construction
• Metal, 4” oval duct connector with no metallic clatter
• Includes 4" oval to 3" round duct reducer
• 4” height allows for 2” x 4” wall or ceiling installation
• Sturdy, easy, mounting directly to stud or joist
• Can be mounted in flat ceilings, sloped ceilings up to
12/12 pitch, and walls
GRILLE:
• Polymeric construction
• Innovative design - the result of extensive research with
designers and consumers
CONTROLS (Purchase separately):
• Refer to Broan’s catalog for a complete line of
accessories to effectively adapt this fan to your
construction requirements.
U.L. Listed for use over bathtubs and showers when
connected to a GFCI protected branch circuit (ceiling
mount only).
1-Year Warranty
Model LP80H: Rough-in housings for LPN80F finish
assemblies (packed 4 per carton). LP80H housings include
slide channels and mounting brackets.
Model LPN80F: Finish assemblies for LP80H rough-in
housings (packed 4 per carton). LPN80F finish assemblies
include blower assembly and grille.