Spec Sheet

Broan-NuTone Canada Inc. Mississauga, Ontario www.nutone.ca 1-877-896-1119
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 1-888-336-3948
Architectural & Engineering Specifications
July 2011
In-Line Radon Fan
MODEL ILRF
ILRFd110714
DESCRIPTION
• UL Listed for use in commercial applications
• Watertight electrical terminal box
• Totally enclosed motor
• High-efficiency motorized impeller
• Automatic reset thermal overload protection
DESIGN FEATURES
Air delivery: 140 CFM at 0.2” S.P.
Sound Level: N/A - unit is remotely mounted
Amps: 0.7
Housing: UV-resistant, durable polycarbonate plastic
Motor: External rotor, ball bearing, 115 volts AC, 60 Hz
Blower Wheel: Backward inclined centrifugal
Duct Size: 4” (102 mm) or 5” (127 mm) diameter
INSTALLATION
• Not for use in cooking areas
• Approved for mounting in wet locations (outdoors)
• Suitable for use over a tub or shower when connected to a
GFCI-protected branch circuit
• Suitable for use with solid-state speed controls
PRODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
TYPICAL SPECIFICATIONS
• Unit shall be NuTone model ILRF
• Housing shall be constructed from UV resistant durable plastic
• Unit shall include a watertight electrical terminal box and factory
sealing to prevent water damage to interior
• Unit shall be approved for use in wet locations
• Unit shal include a motorized impeller for high efficiency
performance, with automatic reset thermal overload protection
• Air delivery shall no be less than 140 CFM (66 L/s). Air rating shall
be conducted at an HVI recognized testing facility. Unit shall be
cULus Listed.
0
5
10
15
20
25
30
36
41
46
51
56
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
Static Pressure (in. w.g.)
Air Flow Rate (cfm)
Static Pressure (mm w.g.)
Air Flow Rate (L/s)
0 20 40 60 80 100 120 140 160
0 9 19 28 38 47 57 66 75
7/8”
(22 mm)
7/8”
(22 mm)
6”
(152 mm)
10”
(254 mm)
2”
(51 mm)
2”
(51 mm)
3⅞”
(98 mm)
4⅞”
(124 mm)
10”
(254 mm)
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home Ventilating
Institute, for off-the-shelf products, as they are available to
consumers. Product performance is rated at 0.2 in. static pressure,
based on tests conducted in a state-of-the-art test laboratory.