Warranty

ASSEMBLY & WIRING INSTRUCTIONS

ASSEMBLY

Purchase power supply and low voltage cable

1 ] Add up the wattage from each NuTone Haven fixture you plan to install in order to determine the

required power supply. Each lighted repellent fixture has a combined load of 11 watts (2 watts per

LED light and 9 watts per repellent vaporizer).

2 ] Select a properly sized UL Listed or CSA Certified landscape lighting power supply with secondary

output rating of 12 VAC or 15 VAC. The power supply wattage rating should be greater than the

combined wattage of all NuTone Haven fixtures but must not exceed 300 watts.

3 ] Follow installation instructions included with your power supply for proper installation location and

safety precautions.

4 ] Use only UL or CSA approved low voltage landscape lighting cable, suitable for direct burial and

sunlight resistant.

5 ] Use the distance from the furthest fixture to the power supply to determine length of cable needed.

If connecting repellent and light cables to separate circuits, you will need (2) cables of this length.

6 ] Use 16,14 or 12 gauge cable to ensure brightness of lighting and repellent operation.

Assemble fixture for ground-level installation

Note: Optional mounting flanges are available for deck post or rail installations. Purchase model

HVPFBL (black finish) or HVPFBR (bronze finish) separately and follow instruction included.

1 ] Install ground stakes first to ease installation and prevent fixture damage. Loosen hard soil and

remove stones and rocks before attempting to install ground stakes. Use enclosed striker plate to

protect stakes when hammering. After installation, top of ground stake is flush with grade level.

2 ] Remove wire ties from fixture cables and straighten wires.

3 ] Guide fixture wires through the metal stem. Insert the stem into the fixture head and tighten set

screw.

4 ] Pull fixture wiring completely through opening in the ground stake. Push metal fixture stem into

the ground stake and tighten the set screw.

5 ] Make sure final position provides easy visibility to repellent refill indicator.