Installation Guide

7
Programming Instructions
1 ] Set Clock Time
• Press MODE, until
appears, wait 3 seconds,
Clock indicator glows; use
+ or – button to adjust
hours, noting AM and PM
indicators.
• Press MODE again,
indicator glows;
use + or – button to adjust
minutes
• Depressing and holding
down the + or - button will
cause time to scroll forward
or backward. Release
button to stop the scrolling.
• Press MODE until appears or wait 3 seconds to close “Set
Clock Time”
2 ] Set Repellent “On” and “Off” time via clock
• Press MODE until, appears for 3 seconds, Clock and
Repellent indicators glow; use + or - to adjust hours for repellent on,
noting AM and PM indicators
• Press MODE, Clock and Repellent indicators glow; use + or - to
adjust minutes for repellent on
• Press MODE until appears for 3 seconds, Clock and
Repellent indicators glow; use + or - to adjust hours for repellent off
• Press MODE, Clock and Repellent indicators glow; use + or - to
adjust minutes for repellent off
• Depressing and holding down the + or - button will cause time to
scroll forward or backward. Release button to stop the scrolling.
• Press MODE until appears or wait 3 seconds to close “Set
Clock Time”
PM
AM
Clock Repellent Light Solar
sensor
PROGRAM SETTINGS
MODE - +
LIGHT
ON/OFF
REPELLENT
ON/OFF