Specification Sheet

Chime Model Option for: NM100 and NM200
Module mounting inside Master Station
NM100, NM200 Intercom Accessories
Order Rough-in PLUS finish kit to make a complete unit
Finish Kit
Model No. Finish Width Height
In-Wall
Depth Projects Rough-In Model No.
NA3003C
– 3-1/4" 3-1/4" Chime module mounts inside ‘Master’ station
NA3008C
– 3-1/4" 3-1/4" Chime module mounts inside ‘Master’ station
Finish Kit
Model No. Finish Width Height
In-Wall
Depth Projects Rough-In Model No.
Transformers
NA200TA
– 6-5/8" 4-5/8" 3-3/4" – –
NA300TA
– 6-5/8" 3-3/4" 3-11/16" – –
Cable
NW4S
– – – – – –
NM200 and NM100 Accessories
NA3003C – 3-Note Chime Module
The NA3003C 3-Note Chime Module
can be installed in either NM100 or
NM200 ‘Master’ Stations. To announce
a visitor, the intercom system’s door
chime sounds when the chime button is
pressed on a door speaker connected
to the intercom. The module can be set
to play one, two, or three notes with a
different chime for each door.
NA3008C – 8-Note Chime Module
The NA3008C 8-Note Chime Module
can be installed in either NM100 or
NM200 ‘Master’ Stations. To announce
a visitor, the intercom system’s door
chime sounds when the chime button is
pressed on a door speaker connected to
the intercom. The module can be set to
play one, two, four, or eight notes with a
different chime for each door.
NW4S – Shielded Cable, 22 gauge
The NW4S Shielded Door Station Cable
is 4-conductor, 22 gauge, shielded cable.
The cable is supplied in a 75 foot roll.
This cable is typically used to connect
NM Series door stations to NM200
and NM100 systems.
NA3003C
NA3008C
IA30WH
Intercom Options:
See p. 13 for intercom speakers and volume control and p. 14 for update and surface frames.