Installation Guide

INSTALLATION AND USE & CARE INSTRUCTIONS

INSTALLATION

9. Finish ceiling, then install grille.

Plug light into receptacle in housing. Attach grille pan to

housing with (2) grille mounting screws. Install (2) 60W

(Max.) Type A19 bulbs (not included). Assemble inner

and outer rings to glass shade with (3) mounting nuts

as shown. Attach shade assembly to grille pan with (3)

remaining mounting nuts.

8. Install blower.

Re-install blower removed in Step 2. Secure blower with 2

screws from parts bag and plug blower into black receptacle.

4. Remove old fan.

Enlarge ceiling opening (if necessary) to 9¾” parallel to

joist) by 10½” (perpendicular to joist). Leave ductwork

and wiring in place.

5. Fold mounting ears flat against

housing.

RETROFIT

GRILLE

PA N

GLASS

SHADE

INNER RING

GRILLE

BRACKETS

LIGHT PLUG

OUTER RING

(6) SHADE

MOUNTING

NUTS

(2) GRILLE

MOUNTING

SCREWS

(2) 60W (MAX.)

TYPE A19 BULBS

(not included)

Assemble rings

to shade before

attaching to

grille pan.