Spec Sheet

ManualsBrandsNuTone ManualsCooling & Air QualityNuTone®Ventilation Fan With Selectable CFM And CleanCover Grille

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

SPECIFICATION SHEET

Venmar Ventilation ULC Drummondville (Quebec), Canada www.nutone.ca 877-896-1119

91E 1101993A

MODEL AERN50110DCKC

ROOMSIDE SERIES FAN

DESCRIPTION

BLOWER:

• Plug-in, permanently lubricated, brushless DC motor -

engineered for continuous operation

• Dynamically balanced centrifugal blower wheel for quiet,

efficient performance

• Low RPM for quiet operation

• Selectable settings of 50, 80 or 110 CFM

HOUSING:

• Rugged, 26 gauge, galvanized steel construction

• Polymeric, 4” damper / duct connector with tapered

sleeve and no metallic clatter

• 5-3/4” height allows for 2” x 6” ceiling installations

• Sturdy, easy, four-point mounting directly to joist

• Can be mounted in sloped ceilings (duct connector must

point up)

• Can be installed in a wall if mounted 8-ft. or more above

the floor (duct connector must point up)

• Optional snap-on flange kit

GRILLE:

• Polymeric construction

• Innovative design - the result of extensive research with

designers and consumers

U.L. Listed for use over bathtubs and showers when

connected to a GFCI protected branch circuit (ceiling

mount only)

Acceptable for use in insulated ceilings (Type I.C.)

3-Year Warranty

TYPICAL SPECIFICATION

Fan shall be NuTone Model AERN50110DCKC.

Fan shall have corrosion resistant galvanized steel housing

with four-point mounting capability. It shall be ducted to a

roof or wall cap using 4” round ductwork.

Blower assembly shall be removable, have a centrifugal

blower wheel and a permanently lubricated brushless DC

motor designed for continuous operation.

Non-metallic damper/duct connector shall be included.

Air delivery shall be no less than the airflow values and

no greater than the sound level values listed in the HVI

Performance Ratings provided in this specification (see

following chart). All air and sound ratings shall be certified

by HVI.

Fan shall be acceptable for use in insulated ceilings (Type

I.C.) and U.L. Listed for use over bathtubs and showers

when connected to a GFCI protected branch circuit.

Summary of content (4 pages)

PAGE 1
SPECIFICATION SHEET MODEL AERN50110DCKC ROOMSIDE SERIES FAN DESCRIPTION TYPICAL SPECIFICATION BLOWER: • Plug-in, permanently lubricated, brushless DC motor engineered for continuous operation • Dynamically balanced centrifugal blower wheel for quiet, efficient performance • Low RPM for quiet operation • Selectable settings of 50, 80 or 110 CFM Fan shall be NuTone Model AERN50110DCKC.
PAGE 2
PERFORMANCE RATINGS - MODEL AERN50110DCKC ROOMSIDE SERIES FAN Speed Setting 50 80 110 Static Pressure (In. H2O) AIR FLOW PERFORMANCE Airflow Sound (CFM) (Sones) Power (Watts) Efficacy (CFM/W) 0.1 50 < 0.3 3.4 14.7 0.25 36 0.5 5.3 6.7 0.1 80 0.4 6.5 12.6 0.25 71 0.9 9.4 7.6 0.1 110 0.9 10.6 10.4 0.25 105 1.4 14.9 7.
PAGE 3
FICHE TECHNIQUE VENTILATEUR SÉRIE FLEX DC MC MODÈLE AERN50110DCKC DESCRIPTION SPÉCIFICATIONS TECHNIQUES VENTILATEUR : • Moteur enfichable, lubrifié à vie, sans balais et conçu pour un fonctionnement continu • Roue de ventilateur centrifuge équilibrée dynamiquement assurant une performance silencieuse et optimale • Bas régime de rotation permettant un fonctionnement silencieux • Réglages sélectionnables de 50, 80 ou 110 pi3/min Le ventilateur doit être le modèle NuTone AERN50110DCKC.
PAGE 4
ÉVALUATIONS DE RENDEMENT - VENTILATEUR SÉRIE FLEX DCMC MODÈLE AERN50110DCKC PERFORMANCE HVI 50 80 110 Réglage de 50 pi3/min 0,6 Puissance Efficacité (Watts) (pi3/min/W) 0,1 50 < 0,3 3,4 0,25 36 0,5 5,3 6,7 0,1 80 0,4 6,5 12,6 0,5 14,7 0,25 71 0,9 9,4 7,6 0,1 110 0,9 10,6 10,4 0,25 105 1,4 14,9 7,0 Pression statique (po H2O) Pression Réglage Débit Niveau statique de la d’air sonore (Pouces vitesse (pi3/min) (Sones) H2O) PERFORMANCE DU DÉBIT D’AIR RÉSULTATS HOMOLOGUÉS HV