Specification

Broan Hartford, Wisconsin www.nutone.com 888-336-3948
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
SPECIFICATION SHEET
91A 1101113A
MODEL AERN110SLW
ROOMSIDE
TM
SERIES
DECORATIVE FAN / LIGHT
DESCRIPTION
BLOWER:
• Plug-in, permanently lubricated motor - engineered for continuous
operation
• Dynamically balanced centrifugal blower wheel for quiet, efficient
performance
• Low RPM for quiet operation
HOUSING:
• Rugged, 26 gauge, galvanized steel construction
• Polymeric, 4” duct connector with tapered sleeve and no metallic
clatter
• 5-3/4” height allows for 2” x 6” ceiling installations
• Sturdy, easy, four-point mounting directly to joist
LIGHT FIXTURE:
• Low-profile, consumer-validated design
• White corrosion-resistant trim
• Adapter bracket for constant air flow completely covers drywal cuts
• Acrylic lens
• Light fixture is plug-in and removable
• Dimmable,16-Watt intergrated LED lighting for energy efficiency
• 3500K color temperature provides soft white light - ideal for
bathroom illumination
• LED lasts up to 15,000 hours for maintenance-free convenience
AUTOMATIC CONTROL:
• Humidity control automatically turns fan ON when either of these
conditions is detected:
- a rapid to moderate (user adjustable) increase of
humidity
- humidity above user-adjustable set-point (50%-80% RH)
• Two wire manual operation for odor control - Turns fan ON when
power line through wall switch is cycled ON, OFF and back ON
• Remains ON for a user-adjustable 5 to 60 minutes after humidity
has stabilized and is below set-point or after manually initiated
through power line cycling
• Saves energy because unit runs only for the time required.
A unit controlled with a wall timer may keep fan ON longer
than required or turn it OFF before room is sufficiently
ventilated
CONTROLS (Purchase separately):
• Refer to NuTone’s catalog for a complete line of
accessories to effectively adapt these fans to your
construction requirements.
DIMMING CONTROLS :
• May not be compatible with all dimmer controls
• Each application is unique and various factors such as
load, common neutrals or other electrical products on the
circuit can, in certain instances, cause variance in system
performance.
• Dimmer model numbers vary slightly depending on
color, packaging type, etc. such that variations of Model
numbers may be suitable. Consult dimming system
manufacturer for additional support in operation
* For a list of compatible controls, see NuTone.com.
For installation in flat ceilings only.
U.L. Listed for use in insulated ceilings (TYPE I.C.)
3-Year Warranty
JA8-2016