Specification

Broan Hartford, Wisconsin www.nutone.com 888-336-3948
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
SPECIFICATION SHEET
91A 1101101A
MODEL AERN110LTK
ROOMSIDE
TM
SERIES
DECORATIVE FAN / LIGHT
DESCRIPTION
BLOWER:
• Plug-in, permanently lubricated motor - engineered for continuous
operation
• Dynamically balanced centrifugal blower wheel for quiet, efficient
performance
• Low RPM for quiet operation
HOUSING:
• Rugged, 26 gauge, galvanized steel construction
• Polymeric, 4” duct connector with tapered sleeve and no metallic
clatter
• 5-3/4” height allows for 2” x 6” ceiling installations
• Sturdy, easy, four-point mounting directly to joist
LIGHT FIXTURE:
• Low-profile consumer-validated design
• Corrosion-resistant
• Adapter bracket for constant air flow, completely covers drywall cuts
• Acrylic lens
• Light fixture is plug-in and removable
• Includes three easy-to-change trim kits - White, Brushed Bronze
and Brushed Nickel
• Dimmable,16-Watt intergrated LED lighting for energy efficiency
• 3500K color temperature provides soft white light - ideal for
bathroom illumination
• LED lasts up to 15,000 hours for maintenance-free convenience
CONTROLS (Purchase separately):
• Refer to NuTone’s catalog for a complete line of accessories to
effectively adapt these fans to your construction requirements.
DIMMING CONTROLS :
• May not be compatible with all dimmer controls
• Each application is unique and various factors such as load,
common neutrals or other electrical products on the circuit can, in
certain instances, cause variance in system performance.
• Dimmer model numbers vary slightly depending on
color, packaging type, etc. such that variations of Model
numbers may be suitable. Consult dimming system
manufacturer for additional support in operation
* For a list of compatible controls, see NuTone.com.
For installation in flat ceilings only.
U.L. Listed for use in insulated ceilings (TYPE I.C.)
3-Year Warranty
TYPICAL SPECIFICATION
Fan / Light shall be NuTone Model AERN110LTK.
Fan / Light shall have corrosion resistant galvanized steel
housing with four-point mounting capability. It shall be ducted
to a roof or wall cap using 4” round ductwork.
Blower assembly shall be removable, have a centrifugal-type
blower wheel and a permanently lubricated motor designed
for continuous operation.
Non-metallic damper/duct connector shall be included.
Light fixture assembly shall be plug-in, removable and include
a acrylic lens. It will have a corrosion-resistant base.
LED shall be 16-Watt with 3500K color temperature and 1100
lumen output (min.).
Air delivery shall be no less than the airflow values and
no greater than the sound level values listed in the HVI
Performance Specifications provided in this specification (see
following chart). All air and sound ratings shall be certified by
HVI.
Ceiling Ventilator shall be cULus Listed for use in insulated
ceilings (Type I.C.).
JA8-2016