Installation Guide

INSTALLATION AND USE & CARE INSTRUCTIONS

INSTALLATION

9. Finish ceiling, then install grille.

Pre-assemble mounting rod to grille pan using lock washer

and jam nut. Hand-tighten jam nut - plus 1/4 turn with a

wrench (10-15 in.-lbs.). Do not overtighten jam nut.

Plug light into receptacle in housing. Attach grille pan to

housing with (2) grille mounting screws. Pull out sliding

shade hook (see arrow) and install glass shade using

hardware as shown. Do not overtighten finial nut. Push

sliding shade hook back into place over glass shade.

8. Install blower.

Re-install blower. Secure blower with 2 screws from parts

bag and plug blower into black receptacle.

4. Remove old fan.

Enlarge ceiling opening (if necessary) to 9¾” parallel to

joist) by 10½” (perpendicular to joist). Leave ductwork

and wiring in place.

5. Fold mounting ears flat against

housing.

RETROFIT

GRILLE

PAN

(2) GRILLE

MOUNTING

SCREWS

MOUNTING

ROD

FLAT WASHER

FELT WASHER

JAM NUT

GLASS

SHADE

FELT WASHER

FINIAL NUT

LOCK

WASHER

GRILLE

BRACKETS

LIGHT PLUG

SLIDING

SHADE

HOOK

FINIAL WASHER