Submittal Sheet

Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 888-336-3948
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
21B 99044811A
INSTALLATION
Complete installation instructions are included with each
Decorative Ventilation Fan with Light.
ARCHITECT'S SPECIFICATION
Decorative Ventilation Fan with Light unit shall be NuTone Model
788CHNT.
Unit shall have galvanized steel housing with integral mounting
holes. It shall be ducted to a roof or wall cap.
Blower assembly shall be removable and have a permanently
lubricated motor.
Light fixture assembly shall be plug-in, removable and include
a white opal glass shade and a corrosion-resistant base with
chrome finish.
Lamps shall be two 13W maximum, GU24 type, fluorescent bulbs
- included with unit.
Air delivery to be no less than 100 cfm and sound level no greater
than 1.5 sones. Air and sound ratings shall be certified by HVI.
Unit shall be U.L. Listed for use in insulated ceilings (Type I.C.)
Unit shall be ENERGY STAR
®
qualified.
Architectural & Engineering Specifications
February 2012
Decorative
Ventilation Fan with Light
MODEL 788CHNT
HVI-2100 CERTIFIED RATINGS comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute,
for off-the-shelf products, as they are available
to consumers. Product performance is rated at
0.1 in. static pressure, based on tests conducted
in a state-of-the-art test laboratory. Sones are a
measure of humanly-perceived loudness, based
on laboratory measurements.
DESCRIPTION
LIGHT FIXTURE:
• Corrosionresistantchromefinish
• Whiteopalglassshade
• Closemountdesign
• Uses two 13W maximum, GU24 type, fluorescent bulbs.
Bulbs included.
• Ventopeningsinfixturebaseforexhaustfan
• Lightfixtureassemblyisplug-inandremovable
BLOWER:
• Plug-inpermanentlylubricatedmotor
• Polymericblowerwheel
HOUSING:
• Rugged,25-gagegalvanizedsteelconstruction
• Fitsin2"x6"construction
• Pre-locatedmountingholesforquick,accurateinstallation
• Tapered,polymericductfittingwithbuilt-inbackdraftdamper
for easy, positive duct connection and no metallic clatter
DO NOT install in a tub or shower enclosure.
NOTE: For installation in flat ceilings only.
U.L. Listed for use in insulated ceilings (Type I.C.)
Use supply wiring rated for at least 90
0
C.
ENERGY STAR
®
qualified.
MODEL VOLTS AMPS
788CHNT 120 0.8
STATIC PRESSURE CFM SONES FAN WATTS DUCT
0.10 100 1.5 36.4
4"Round
0.25 88
SPECIFICATIONS