Spec Sheet

Broan Hartford, Wisconsin www.broan-nutone.com 888-336-3948
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Architectural & Engineering Specications
April 2021
Model 763
Ventilation Fan
with Light
DESCRIPTION
•
E󰀩cient ventilation and bright light in one easy
installation.
•
Fan and light operate separately or together.
•
Quiet operation with one-piece molded blower wheel and
silent backdraft damper.
•
Attractive grille styling.
•
Plug-in motor and light.
•
Uses one (1) 100 watt incandescent bulb (bulb not
included).
•
Refer to NuTone’s catalog for a complete listing of
accessories to e󰀨ectively adapt this Ventilation Fan with
Light to your construction requirements.
DESIGN FEATURES
Air Delivery: 50 cfm.
Sound Level: 2.5 Sones.
Dimensions: Housing: 8¼” x 8” x 5¾”.
Grille: 12” x 10¾”.
Lamp: One 100W maximum A19
(bulb not included)
Material &
Component Data: Housing: Galvanized steel.
Grille: White polymeric.
Lens: Translucent white polymeric.
Reector: Galvanized steel (white).
Damper: Polymeric.
Motor: Plug-in, permanently lubricated.
Electrical Rating: With one (1) 100 watt bulb:
120 VAC, 60 Hz, 1.6 A
Blower Wheel: One-piece polymeric,
4¾” diameter.
Duct Size: 4” diameter.
Mounting: Mounting ange provided.
Model 763H: Housing Pack
Model 763F: Finish Pack
12D 99045282D
INSTALLATION
•
Suitable for use over tub or shower enclosure when installed
in a GFCI protected branch circuit.
•
Installation instructions are included with each unit.
•
Type IC for use with thermal insulation.
•
Not for use with solid state speed controls.
•
Not for use in kitchens.
ARCHITECT’S SPECIFICATIONS
Ventilation Fan with Light shall be NuTone Model 763 as
manufactured according to listed specications. Fan shall
ventilate 50 cfm at a sound level of 2.5 Sones. Housing shall
be 8¼” x 8” x 5¾” and connect to 4” duct.