Spec Sheet

ManualsBrandsNuTone ManualsCooling & Air QualityNuTone®60 CFM Bath Fan Upgrade Kit, 3.0 Sones

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

SPECIFICATION SHEET

Broan-NuTone Canada Inc., Mississauga, Ontario www.nutone.ca 877-896-1119

RODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

690UPGKITd111108

MODEL 690UPGKIT

BATH FAN UPGRADE KIT

TYPICAL SPECIFICATION

Bath Fan Upgrade Kit shall be NuTone Model 690UPGKIT.

Bath Fan Upgrade Kit shall include a galvanized steel

motor plate designed to accomodate a variety of economy

fan models. Motor shall be removable and permanently

lubricated.

Air delivery shall be no less than 60 CFM and sound level

no greater than 3.0 sones. All air and sound ratings shall be

certified by HVI. Unit shall be cU.L. Listed.

Reduces the sound level of your existing bath fan by

up to 45%*. No rewiring or new ductwork required.

FEATURES

FAN ASSEMBLY:

• Plug-in, permanently lubricated motor

• Polymeric blower wheel

• Galvanized steel motor bracket and motor plate

• Fits into your existing bath fan housing

GRILLE:

• White polymeric - blends well with any decor

• Torsion spring grille mounting - no tools required

* In comparison with EC70 and 695C models.

SPECIFICATIONS

VOLTS AMPS CFM SONES

120 1.2 60 3.0

HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed

by the Home Ventilating Institute, for off-the-shelf products, as they are available to consumers.

Product performance is rated at 0.1 in. static pressure, based on tests conducted in AMCA’s

state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on

laboratory measurements.

Aira VSBP50M, VSBP5XM,

VSBX50M

**The kit will work if your housing measures

8/16” x 7³/8”.

Broan EC50, ECF50, EC70,

ECF70, ECH600

NuTone 695C, 695CB, 696NC,

696NCB, 690AC

For use only with these bath fan models**:

INSTALLATION

Complete installation instructions are included with each kit.

NOTE: Dimensions are in inches.

Summary of content (1 pages)

PAGE 1
SPECIFICATION SHEET MODEL 690UPGKIT BATH FAN UPGRADE KIT Reduces the sound level of your existing bath fan by up to 45%*. No rewiring or new ductwork required. FEATURES FAN ASSEMBLY: • Plug-in, permanently lubricated motor • Polymeric blower wheel • Galvanized steel motor bracket and motor plate • Fits into your existing bath fan housing GRILLE: • White polymeric - blends well with any decor • Torsion spring grille mounting - no tools required * In comparison with EC70 and 695C models.