Specification Sheet

Broan-NuTone LLC Hartford, Wisconsin www.nutone.com 888-336-3948
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
Architectural & Engineering Specications
September 2007
Ventilation Fan
with Heater
MODEL 605RP
DESCRIPTION
•
Two functions in one unit. Use them individually or
together.
1) 1300W heating element provides fast enveloping
heat. Efcient fan evenly distributes warm air through
room.
2) Efcient, quiet blower, exhausts stale air and
moisture to refresh the bath atmosphere.
•
Streamline design with handsome white grille. Grille is
tough engineered resin, impervious to bathroom climate.
•
Includes hanger bars, adjustable from 16”-24”.
•
Built-in junction box with receptacles for simple plug-in of
heater and fan motors.
•
Nickel-chrome heating element.
•
Quiet polypropylene duct adapter with silent, snap-on
backdraft damper. Damper has long, tapering collar for
easy attachment of 4” round duct.
•
Connects to 120 VAC.
•
For your convenience, NuTone offers a complete line
of accessories to adapt this unit to your construction
requirements.
DESIGN FEATURES
Air Delivery: 70 cfm.
Sound Level: 4.0 Sones.
Dimensions: Housing: 14-5/8” x 7-7/8” x 5-5/8”.
Grille: 9-7/8” x 16-1/4” x 1-3/4”.
Material &
Component Data: Housing: Cold rolled steel, galvanized
Grille: Engineered resin.
Damper: Polypropylene.
Motors: Sleeve bearings, thermally protected.
Impellers: Centrifugal.
Element: Open coil, nickel-chromium. 1300W.
Duct Size: 4” diameter.
Electrical Rating: 120 VAC, 60 Hz, 11.5 A
70J 99044046B
INSTALLATION
•
Adjustable hanger bars attach to 16” or 24” O.C. joists in
new construction.
•
Built-in junction box accepts plug-in heater motor, and
fan motor.
•
Duct adapter has built-in damper and long, tapering
collar for duct attachment.
•
Discharge is horizontal through 4” round duct.
•
Each unit includes complete installation instructions for
both new and existing construction.
•
Do not install unit over bath tub or in shower stall.
•
Connect to dedicated 15 amp branch circuit. Use supply
wiring rated for at least 90
O
C.
•
Type IC suitable for use under thermal insulation.
ARCHITECT’S SPECIFICATIONS
Ventilation Fan with Heater shall be model 605RP as
manufactured by NuTone according to listed specications.