User's Manual

PROGRAMMING
Panic Voice Phone Number – Field Number 01, 03, 05, 07
This is the phone number the dialer will call when panic button is activated for
2-way voice speakerphone conversation. You may program up to 4 different
numbers so if the first phone number cannot be called successfully, it will call
the 2nd, 3rd, or 4th phone number. If the first Call Center phone number is called
successfully, it will not call the rest of the Call Center phone numbers.
• Each phone number can be up to 32 digits.
• To program pause between digits, enter [*6] between 2 digits.
• Multiple pause can be enters within a phone number
To enter digits other than numeric numbers, follow the tables below.
Symbols / Special Functions Enter Digits
* *1
# *2
Pause Period (3 seconds) *6
Delete Phone number *9
Press *01* followed by *9 and #, the first monitoring station phone # can be erased.
Follow the same sequence to erase 2nd, 3rd, or 4th phone number by entering [*02*],
[*03*] or [*04*].
Dialer ID (Contact ID Account Number) – Field Number 02
Dialer ID is the Contact ID account number, so when the dialer reports any
Contact ID events to the monitoring station, this is the unique number representing the
dialer. Based on the Contact ID requirement, an account number
has 4 digits, consists of 0 to 9 and letters B, C, D, E, or F. These are some
examples of Contact ID account number:
• 3847
• 2C3B
To enter letters, B to F with a touch tone phone, follow the combinations below:
Touch Tone Digits Contact ID Account Number Letter
[*] + [1] B
[*] + [2] C
[*] + [3] D
[*] + [4] E
[*] + [5] F
Example: To enter account number “8CE6”:
-[*] + [02] + [*] + [8] + [*] + [2] + [*] + [4] + [6] + [#]