User's Manual

AUXILIARY FUNCTIONS 1-4:

The actual operation of these functions will vary from car to car� They are designed

to operate extra vehicle functions like automatic sliding doors or motorized hatches.

Aux 1-4 are virtual outputs only available on certain vehicles when this system is

integrated with the vehicle’s data network. Consult your installer to nd out if any of

these functions are available for your vehicle. If so, conrm each operation with the

controller and write each function in the blank spaces provided below�

- Auxiliary 1 Function (___________________): To activate this function, press

and release the TRUNK and START buttons simultaneously (or P then TRUNK)�

- Auxiliary 2 Function (___________________): To activate this function, press

and release the LOCK and TRUNK buttons simultaneously (or P x2 then TRUNK).

- Auxiliary 3 Function (___________________): To activate this function, press

and release the UNLOCK and START buttons simultaneously (or P x3 then TRUNK).

- Auxiliary 4 Function (___________________): To activate this function,

press and release the UNLOCK and TRUNK buttons simultaneously�

Controller & Transmitter Functions (cont’d)

LOW VOLTAGE & HIGH/LOW TEMP AUTO START: Press

UNLOCK, LOCK, START within 5 seconds�

• THE SYSTEM WILL GIVE ONE CHIRP TO INDICATE

THE LOW VOLT/LOW TEMP(15 DEGREE ONLY) AUTO-

START IS ACTIVATED� SEE PAGE 9 FOR MORE INFO�

• UPON RECEIVING CONFIRMATION, THE CONTROL-

LER WILL CHIRP ONCE AND THE STATUS WILL READ

“RS AUTO” EVERY 5 SECONDS�

(1-WAY TRANSMITTER: PRESS AND RELEASE THE

START BUTTON WITHIN 5 SECONDS OF ARMING THE

SYSTEM)

VEHICLE TEMP REQUEST: Press and release “P” then START

within 5 seconds�

• UPON RECEIVING CONFIRMATION, THE

CONTROLLER WILL PLAY A MELODY AND THE

CLOCK WILL DISPLAY THE VEHICLE’S INTERIOR

TEMPERATURE�

• IF THE TEMP IS BELOW 40°F(4°C) OR ABOVE

90°F(32°C), THE CLOCK WILL ALSO READ “RS

RCMD” (REMOTE START RECOMMENDED)

LOCK/UNLOCK STATUS UPDATE REQUEST: Press and release

“P” then LOCK within 5 seconds�

• THE SYSTEM WILL SEND A FULL STATUS

UPDATE TO THE CONTROLLER IN CASE THE

STATUS CHANGED WHILE THE CONTROLLER

WAS OUT OF RANGE�

• THERE IS NO AUDIBLE INDICATION FOR THIS

FUNCTION�