User's Manual

7
Controller & Transmitter Functions (cont’d)
CHANNEL 3: Press P then TRUNK within 5 seconds�
• YOUR SYSTEM WILL ACTIVATE THE CHANNEL 3
OUTPUT�
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, THE CONTROLLER WILL PLAY THE CHANNEL
3 ANIMATION�
(1-WAY TRANSMITTER: PRESS AND HOLD THE TRUNK
& START BUTTONS FOR 1 SECOND)
CHANNEL 4: Press P twice then TRUNK within 5 seconds�
• YOUR SYSTEM WILL ACTIVATE THE CHANNEL 4
OUTPUT�
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, THE CONTROLLER WILL PLAY THE CHANNEL
4 ANIMATION�
(1-WAY TRANSMITTER: PRESS THE LOCK & TRUNK
BUTTONS FOR 1 SECOND)
CHANNEL 5: Press P three times then TRUNK within 5 seconds�
• YOUR SYSTEM WILL ACTIVATE THE CHANNEL 5
OUTPUT�
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, THE CONTROLLER WILL PLAY THE CHANNEL
5 ANIMATION�
(1-WAY TRANSMITTER: PRESS THE UNLOCK & START
BUTTONS FOR 1 SECOND)
• THE SYSTEM WILL ENTER VALET MODE�
SEE PAGE 12 FOR MORE INFO ON VALET MODE�
(1-WAY TRANSMITTER: PRESS LOCK, UNLOCK,
TRUNK+START)
3
3
3
4
REMOTE VALET: Press LOCK then UNLOCK then TRUNK +
START within 5 seconds�
1
1
1
1
2
2
2
2
3