User's Manual

TO MANUALLY CHANGE FEATURES:

Step 1 Turn the ignition key “ON”, then “OFF”.

Step 2 Within 5 seconds of step 1, press the valet button 5 times to access user features (Press

10 times to access installer features).

~ The siren/horn will sound & the status light will ash.

Step 3 Within 10 seconds of step 2, press the valet button the number of times corresponding

with the desired feature’s number.

~ The siren/horn will chirp equal to the selected feature.

Step 4

4-button & 2-way MODELS: Change the feature by pressing the transmitter button that cor-

responds with the desired setting.

1-button MODELS: Change the feature by pressing the transmitter button OR brake pedal the

same number of times that corresponds with the desired setting (make all presses before hearing

any chirps). NOTE: some cars require the ignition to be on for the brake circuit to operate. In

this case, turn on the ignition before pressing the brake.

~ The siren/horn will chirp equal to the selected setting.

Step 5 If you wish to change more features, repeat steps 3 & 4 at this time.

Step 6 To exit programming, turn the ignition key “ON” then “OFF”. Or, it will exit automatically

after 10 seconds of no activity.

RESTORING FEATURE SETTINGS TO FACTORY DEFAULT:

Step 1 Enter Installer Feature programming (DO NOT SELECT ANY FEATURES).

Step 2

4-button & 2-way MODELS: Press LOCK + UNLOCK (or BRAKE x 5)

1-button MODELS: Press the START button 5 times (or BRAKE x 5)

~ The siren/horn will sound to indicate reset & exit programming

This device complies with FCC Rules part 15. Operation is subject to the follow-

ing two conditions, (1) This device may not cause harmful interference &, (2) This

device must accept any interference that may be received, including interference

that may cause undesired operation.

The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modications to this equipment. Such modications could void the

user’s authority to operate the equipment.

A matrix of all programmable features & their options are on the next page. For detailed

information on each feature, please refer to the operation manual. Use the procedure below to

make any necessary changes.

NOTE: You can program features via your computer with Omega Weblink.

Visit www.omegaweblink.com for more information.

PROGRAMMING FEATURES

Programmable Features