User's Manual
Status Light
The status light is built into the window mount antenna module. It is desirable for it to be visible
from as many angles around the vehicle as possible for maximum visual theft deterrence.
Valet / Programming Button
Vehicle Learn
The valet button is built into the window mount antenna module. It is used to put the system in
valet mode, program remotes, & program features.
Vehicle Learn is a procedure that allows you to quickly congure all vehicle dependant
features. It also serves as a diagnostic tool for your IGN/ACC/START output connections on the
main power harness. It’s much faster than programming, saving you valuable time, & helps you
discover critical mistakes.
VEHICLE LEARN WILL:
• Detect the function of the PINK, PINK/WHITE, and ORANGE wires to
automatically change the outputs to match the vehicle.
• Diagnose the PINK, PINK/WHITE, ORANGE, & VIOLET wire connections.
• Let you quickly choose engine type
• Auto-select Data-tach, tach wire, or tachless modes.
• Auto-select data port protocols
• Save tons of time in the bay!
BEFORE YOU BEGIN:
• Make all wire connections
• Connect any accessories/modules to the data ports.
If you are using an interface module/bypass kit, make sure it is in “DATA
MODE” and programmed to the vehicle.
• Set the parking brake if it is connected to the BLACK/WHITE wire.
This system is equipped with an outboard receiver or transceiver (2-way) module. It is designed
to be window mounted high on the windshield for optimal performance & range. It is best to mount
this module using the double sided stick pad included (be sure to clean glass before adhering).
Mount it high in the windshield trying to avoid metal parts of the vehicle as they can create “blind
spots” for the antenna. Also, metal based window tint can have an adverse affect on performance.
Since the system’s status light & valet are contained in this module, high visibility is also desired
for theft deterrence. Route the harness to the antenna module being sure to avoid sharp metal
objects that could compromise the harness jacket.
Some models are equipped with a motion sensor that provides added protection for remote
start by shutting down the engine if motion is detected during the START output. This is ideal
for manual transmission vehicles and eliminates the need for performing ‘manual transmission
reservation’ by the user. If the sensor is present, a “3D” logo will be on the antenna case.
Window Mount Antenna Module
3D Motion Sensor
12