User's Manual
3
THE 2-WAY CONTROLLER
Controller & Transmitter Overview
Controller part number:
154-03 (black w/ CR2032 batteries)
157-03 (red w/ rechargeable battery)
158-03 (black w/ rechargeable battery)
1) Antenna: Sends commands to the
system and receives con rmations for 2-way
functions.
2) LCD Display: Displays all controller func-
tions as well as the status of your system.
3) Control Buttons: Will light up when
pressed.
4) Charging Port (rechargeable models
only): The buttons will ash while charging.
When nished, the buttons will stay lit.
5) Programming Button: This is used for
setting controller features.
1
2
“lock”
button
“trunk”
button
“unlock”
button
“start”
button
Transmitter part number:
148-03 (w/o antenna & blue light)
1410-03 (w/ antenna & red light)
Call your dealer or visit
www.caralarm.com to order replacement transmitters.
Transmitter battery replacement:
Remove the small screw from the lower
back case, and separate the transmitter
halves. Replace the battery with the same
type and reassemble the transmitter case.
THE 1-WAY TRANSMITTER
LOCK / ARM: Press and release the “LOCK” button.
THE SIREN WILL CHIRP & THE PARKING LIGHTS WILL •
FLASH ONCE.
UPON RECEIVING CONFIRMATION FROM YOUR SYS-•
TEM, THE CONTROLLER WILL SHOW THE LOCK/ARM
ICON AND BEEP ONCE
NOTE: PRESSING LOCK TWICE IN 5 SECONDS STARTS
THE PARKING TIMER. THE CLOCK WILL CHANGE TO
0:00 AND START COUNTING IN MINUTES & HOURS.
(1-WAY TRANSMITTER: PRESS THE LOCK BUTTON)
Controller & Transmitter Functions
4
5
3
3