User's Manual

THE 2-WAY CONTROLLER

Controller & Transmitter Overview

AL-1950-EDPB Controller part number: 155-03

AL-2050-EDPB Controller part number: 156-03

1) Antenna: Sends commands to the system and

receives conrmations for 2-way functions.

2) OLED Display: Displays all controller functions

as well as the status of your system.

3) Backlit Buttons: Flashes while transmitting and

indicates battery charging status.

4) Control Buttons: These are the primary use

buttons LOCK, UNLOCK, TRUNK, & START. They

are also used to navigate the controller’s options.

5) Charger Port: This is where you plug in the

charger to recharge the controller’s battery.

6) Programming Button: This is used for setting

controller features and many other functions.

See “programming controller options” later in this

manual.

Battery Level Indicator*

Clock/Timer

Current System State

Vehicle Image

(Selectable)

Alarm Clock ON icon

Vehicle Name

(Programmable)

Melody Indicator

Vibration Mode Indicator

Lock/Unlock Indicator

2-way In Range

Indicator

*The controller is powered by a built-in rechargeable battery. When the battery level

indicator shows a low battery, plug the supplied USB cable into the controller, then

connect the other end to the supplied AC adapter, car adapter(AL-2050-EDPB only),

or your computer’s USB port. While charging, the indicator will ash from empty to full

and the backlit buttons will ash once every 5 seconds while charging. When full, the

indicator will be solid green and the backlit buttons will stay illuminated.

THE CONTROLLER STATUS SCREEN