User's Manual
3
THE 2-WAY CONTROLLER
Controller & Transmitter Overview
Controller part number: 154-03
1) Antenna: Sends commands to the
system and receives conrmations for 2-way
functions.
2) LCD Display: Displays all controller func-
tions as well as the status of your system.
3) Lock Button
4) Unlock Button
5) Trunk Button
6) Start Button
7) Programming Button: This is used for
setting controller features.
Battery Type: CR2032 (two required)
7
1
5
2
“lock”
button
“trunk”
button
“unlock”
button
“start”
button
Transmitter part number: 148-03
Call your dealer or visit
www.caralarm.com to order replacement
transmitters.
Transmitter battery replacement:
Remove the small screw from the lower
back case, and separate the transmitter
halves. Replace the two CR2016 batteries
and reassemble the transmitter case.
THE 1-WAY TRANSMITTER
LOCK / ARM: Press and release the “LOCK” button.
THE SIREN WILL CHIRP & THE PARKING LIGHTS WILL •
FLASH ONCE.
UPON RECEIVING CONFIRMATION FROM YOUR SYS-•
TEM, THE CONTROLLER WILL SHOW THE LOCK/ARM
ICON AND BEEP ONCE
NOTE: PRESSING LOCK TWICE IN 5 SECONDS STARTS
THE PARKING TIMER. THE CLOCK WILL CHANGE TO
0:00 AND START COUNTING IN MINUTES & HOURS.
(1-WAY TRANSMITTER: PRESS THE LOCK BUTTON)
3
Controller & Transmitter Functions
4
6