User's Manual

Anti-Carjacking Protection
The system is equipped with two separate Anti-Carjacking protection features (ignition,
open door, or both)� All are programmable, and must be turned on to operate� Once
activated, the user has 60 seconds to cancel the Anti-Carjacking protection process
(described below)� If Anti-Carjacking is not cancelled, 53 seconds after being activated
the siren will begin to chirp for 7 seconds to alert the user that the system is about to enter
into an alarm condition� The Valet Switch may still be pressed once during this period to
cancel the Anti-Carjacking process�
If the Anti-Carjacking process is not cancelled before the 60 second countdown ex-
pires, the system will enter an alarm condition, sounding the siren and ashing the parking
lights� 30 seconds after this occurs, or should the ignition be turned off in the meantime,
the stater interrupt will engage� Once the system enters the alarm condition, it will not
respond to the transmitter, nor will the system reset automatically after 60 seconds, and it
can only be disengaged by:
Step 1 Turning the vehicle’s ignition off�
Step 2 Turning the ignition back on�
Step 3 Within 5 seconds, perform an Emergency Override using the Valet Switch� If the
SecureCode has been customized, the correct number of Valet Switch presses must be
made�
The different types of Anti-Carjacking protection are:
Ignition Activated Anti-Carjacking activates every time the vehicle’s ignition is turned
on� The Valet Switch must be pressed within 60 seconds of activating to cancel Anti-
Carjacking� This is User Programmable Feature #12�
Door Anti-Carjacking activates when a door is opened after the vehicle is started and
the engine is running� The Valet Switch must be pressed within 60 seconds after activa-
tion to cancel Anti-Carjacking� This is User Programmable Feature #12�
12