User Manual

Car Finder

Press the and buttons together for 1.5 seconds

(2 LED ﬂashes) to initiate the Car Finder function.

The parking lights will ﬂash slowly ﬁve times.

Note: This feature can be activated whether the

vehicle is locked or not.

Button

Press and hold this button for 1.5 sec (2 LED ﬂashes) to

initiate the remote start sequence.

Once the engine is running, press and release the button

again for 1.5 sec (2 LED ﬂashes) to stop the remote start

operation if needed.

Note: The default setting for the remote start feature is one press.

This control can be re-programmed by the installer to require up to

three presses to initiate the remote start function.