User Manual

Key Takeover:

When you are ready to drive the vehicle

1. Unlock the door using the CARBINE remote control.

2. Enter the vehicle and do not step on the foot brake.

3. Insert the ignition key and turn it to the RUN position.

4. Step on the foot brake. The remote starter will shut off and the

parking lights will turn off.

5. Disengage the parking brake and begin driving.

Note 1: If the foot brake is pressed before the ignition key is

placed in the RUN position, the remote starter will

disengage, and you will have to re-start the engine

using the normal starting procedure.

Note 2: If your vehicle uses a Smart Key or PTS (Push To Start)

starting system. Step on the brake (the engine will stop)

and press the button to re-start the engine

as normal.