Installation Instructions

2022-03-31
The Lock function (press 7/8 and 9/0 simultaneously) will continue to operate even if the
keypad is in Anti-Scan/Lockup mode.
• After one minute, the Anti-Scan Mode will deactivate, and the keypad functions will reset to
normal operation.
• If the three attempts fail to enter the correct 5-digit code (master code or personal code) for a
second or third time, the keypad will activate “Anti-Scan/Lockout Mode” for one minute. The
same conditions will apply.
• If there are any additional three attempts that fail to enter the correct 5-digit code (master code
or personal code), the keypad will activate “Anti-Scan/Lockout Mode” for five minutes.
LED Flash Pattern Indicator
• The transmit LED indicator at the top of the keypad will quickly flash 3 times each time a button
is pressed while the keypad is in “Anti-Scan/Lockout mode”.
• The transmit LED indicator at the top of the keypad will slowly flash 1 time when the “Anti-
scan/Lockout mode” times out.
To unlock the vehicle:
1. Enter the 5-digit code
2. Press and release the button 3/4.
The parking lights will flash two times, indicating the system is disarmed and has unlocked the
doors (if equipped and connected).
To lock the vehicle:
Press and hold the 7/8 and 9/0 buttons simultaneously for at least 2 seconds.
The parking lights will flash once, indicating the system has locked the doors (if equipped and
connected).
Note: The user does not need to unlock the keypad when locking the vehicle using the keypad.
To open the tonneau cover:
1. Enter the 5-digit code
2. Press and release the button 1/2.
To close the tonneau cover:
1. Enter the 5-digit code
2. Press and release the button 9/0.