Owner's Manual

CHANGING the CHIRP VOLUME
The system is programmed to arm and disarm silently, however if you prefer to make the vehicle's
horn sound when arming and disarming, the system can be programmed to do this, either with
soft horn chirps or louder horn chirps. To do this ;
1. Start with the L.E.D. light switch in the off position, then turn the vehicle's ignition
key on then off.
2. Within 5 seconds, cycle the L.E.D. light switch to on then off 4 times ( you will
hear a soft chirp, stop here if you want soft chirps activated ).
3. Continue to cycle the L.E.D. light switch to on then off 1 more time ( you will hear
a louder chirp, stop here if you want louder chirps activated ).
4. Continue to cycle the L.E.D. light switch to on then off 1 more time ( you will not
hear the horn, stop here if you want silent arming active ).
NOTE : Whenever the chirps are turned off, the 4 chirp intrusion indicator and
3 chirp defective zone indicator will always operate. These are important warnings
to you that something has happened, and they can not be turned off.
9