User's Manual

7
Stopping Your Vehicle with the 1-Way Transmitter:
Press and hold** the button to turn off the vehicle.
Starting Your Vehicle with the 1-Way Transmitter:
The remote control start function is activated by pressing the button two times*
within 3 seconds on the 1-way remote control transmitter. The system will check
the vehicle to ensure that it is safe to start, and if all safety parameters are correct,
the engine will start within 5 seconds (diesel engines may take longer, to allow the
glowplugs suffi cient time in all conditions to heat up).
Note: See the vehicle owner’s manual for further details on remote start
operation.
Using the Remote Start Feature (optional)
1-Way Transmitter
Press two times to
activate Remote Start.
Press and hold** to
manually shut down the
Remote Start.
Press to initiate
Car Find. Press and
hold** to initiate Panic
2-Way Transmitter
* May be activated by a “Press & Hold”, refer to “User Selectable Options” in this manual.
** “Press & Hold” or “Pressing and Holding” refers to pushing the transmitter button for more
than 2.5 seconds.
4280760 Phase 2 VSS_RMST Owners Guide.indd 74280760 Phase 2 VSS_RMST Owners Guide.indd 7 3/22/2017 4:52:31 PM3/22/2017 4:52:31 PM