User's Manual

7
Feature #1 Remote Start Run Time
10 Minutes (press the brake pedal 1 time to program) - DEFAULT
5 Minutes (press the brake pedal 2 times to program)
15 Minutes (press the brake pedal 3 times to program)
20 Minutes (press the brake pedal 4 times to program)
This feature sets the period of time that the engine will run after being remotely
started. If the engine is not stopped by controller/transmitter command or a safety
circuit violation, the engine will automatically stop upon the expiration of the selected
time period. Caution: The remote engine starting feature should NEVER be
used when the vehicle is parked in an enclosed structure or garage.
ThisgroupofUserProgrammableFeaturesareallaccessedasagroupintherst
level of features’ programming. These features have a direct affect upon the sys-
tem’s operations, so the programming and operation of each are described.
Feature #2 Steady/Flashing Lights During Remote Start
Steady (press the brake pedal 1 time to program) - DEFAULT
Flashing (press the brake pedal 2 times to program)
ThisFeaturecongurestheoperationofthevehicle’sparkinglightsduringthe
remote start operation. The default setting turns on the parking lights during remote
start;theothersettingashestheparkinglightsonandoffduringremotestart.
User Programmable Features
Feature #3 Conrmation Chirp Function & Volume
Low (press the brake pedal 1 time to program) - DEFAULT
High (press the brake pedal 2 times to program)
N/A (press the brake pedal 3 times to program)
OFF (no chirps) (press the brake pedal 4 times to program)
Thisfeatureallowsthechoiceoftwodifferentvolumelevelsofthesystem’sconr-
mation chirps, you can hear and choose the setting with the best chirp volume as
you select each option.
Feature #5 Doors Lock With Ignition On
Off (press brake pedal 2 times to program) - DEFAULT
On (press brake pedal 1 time to program)
Thisfeatureconguresthesystemtoautomaticallylockthevehicle’sdoorsevery
time that the ignition switch is turned on. The following feature #6 controls the
automatic unlocking operations.
Feature #6 Doors Unlock With Ignition Off
Off (press brake pedal 2 times to program) - DEFAULT
On (press brake pedal 1 time to program)
Similar to the previous locking feature, except this feature controls the unlock opera-
tion when the ignition is turned off.
Feature #7 Doors Unlock With Trunk Release
Off (press brake pedal 2 times to program)
On (press brake pedal 1 time to program) - DEFAULT
When trunk release (CH2) is activated, this feature determines whether the
doors will unlock or not.