User's Manual

3
Stopping Your Vehicle:
Press and hold** the button for more than 2 seconds to turn o the vehicle.
Starting Your Vehicle:
The remote control start function is activated by pressing and holding* the button on
the 1-way remote control transmitter for more than 2 seconds. The system will check the
vehicle to ensure that it is safe to start, and if all safety parameters are correct, the engine
will start within 5 seconds (diesel engines may take longer, to allow the glowplugs su cient
time in all conditions to heat up).
Note: See the vehicle owner’s manual for further details on default (10 minute) and optional
(5 / 15 minute) run time settings.
Using the Remote Control Start Function
QUICKSTART
1-Way Transmitter
* May be activated by a “Double Press”, refer to “User Selectable Options” in this manual.
** “Press & Hold” or “Pressing and Holding” refers to pushing the transmitter button for
more than two seconds.
Press and hold** for more
than two seconds to activate
the Remote Start
Press and hold** for more
than two seconds to shut
down the Remote Start