User's Manual

9PROPLME Install Guide rev A.
SETUP & PROGRAMMING - LOT MODE
Lot Mode ACM Keypad Transmitter Programming
1. Open a door.
2. Turn the ignition ON.
3. Press and release the override button 3 times, the system will chirp 1 time.
4. Enter the desired VEHICLE NUMBER into the ACM keypad and then press the
LOCK button, the system will respond with 1 chirp.
5. Turn the ignition OFF to exit transmitter programming, the system will chirp 2
times to conrm exit.
NOTE: This system has 1 button programming which programs all channels of the
transmitter to the system at once.
When an ACM keypad is programmed to the system, it is automatically transi-
tioned into Lot Mode. Only 1 vehicle number may be learned to the system.
Lot Mode Feature Programming - Without an ACM Keypad
1. Open a door.
2. Turn the ignition ON.
3. Press and release the override button 3 times, the system will chirp 1 time.
4. Turn the ignition OFF, the system will chirp 2 times.
5. Turn the ignition ON, the system will chirp one time indicating option #1 in the
feature bank. The LED will ash the current setting for the option.
6. Use the override button to scroll through the selections in the feature bank, the
system will chirp to match the feature number.
7. Press the programming button on the module to change the desired feature.
The LED will ash indicating the feature’s setting.
8. Turn the ignition OFF to exit programming, the system will chirp 1 time to
conrm exit.
Dealer Lot Mode Description
Lot Mode - Dealer Lot Protection & Keyless Entry System.
Limited security features. Passive arming / locking and starter interrupt utilizing a
dealer ACM Keypad remote transmitter.