User's Manual

SETUP & PROGRAMMING - CONSUMER MODES

Consumer Mode Transmitter Programming

1. Open a door.

2. Turn the ignition ON.

3. Press and release the override button 3 times.

4. The system will chirp 1 time.

5. Press the lock button of each transmitter you wish to program.

6. The system will respond with 1 chirp for each accepted transmitter.

7. Turn the ignition OFF to exit transmitter programming.

8. The system will chirp 2 times to conrm exit.

Note: This system has 1 button programming which programs all channels of the

transmitter to the system at once.

Consumer Mode Feature Programming - Without Transmitters

1. Open a door.

2. Turn the ignition ON.

3. Press and release the override button 3 times, the system will chirp 1 time.

4. Turn the ignition OFF, the system will chirp 2 times.

5. Turn the ignition ON, the system will chirp one time indicating option #1 in the

feature bank. The LED will ash the current setting for the option.

6. Use the override button to scroll through the selections in the feature bank, the

system will chirp to match the feature number.

7. Press the programming button on the module to change the desired feature,

The LED will ash indicating the feature’s setting.

8. Turn the ignition OFF to exit programming, the system will chirp 1 time to

conrm exit.

Consumer Mode Types

Blue Mode - Keyless Entry Security Upgrade System.

Full security utilizing the vehicle’s existing factory remote transmitters.

Red Mode - Remote Vehicle Security & Keyless Entry System.

Full security adding aftermarket remote transmitters.

Green Mode - Interior Theft Sensor.

Add-on impact sensor for vehicles with basic factory security systems and can also

be controlled by either the factory or aftermarket remote transmitters.