User's Manual

43PROPLME Install Guide rev A.
System Function
Lot Mode
ACM Keypad TX
Consumer Mode
Aftermarket TX
Operation Method
Lock Doors / Arm System Lock Lock Press and Release
Unlock / Disarm
(consumer Mode)
Unlock Press and Release
Unlock / Unlock 2 / Disarm
(Lot Mode)
Unlock Press and Release
2 Step UnlockUnlock
Press and Release 2 times (within 5 sec)
Unlock & Unlock 2 activate at the same time
Trunk TrunkPush and Hold (2 Sec)
Trunk / DisarmUnlockPush and Hold (2 Sec)
Car Finder (Progressive)Find/PanicFind/Panic
Press and Release, 3 volume levels for Chirp -
1st press - Low
(within 3 sec of 1st press) 2nd press - Medium
(within 3 sec of 2nd press) 3rd press - Loud
PanicFind/PanicFind/PanicPush and Hold (1 Sec)
Shock Bypass
Lock - Trunk
-or-
Lock - Find/Panic
Press and Release Lock then within 5 sec. Press Trunk
-or-
Press and Release Lock then within 5 sec. Press Car Find
AFTERMARKET TRANSMITTER FUNCTIONS
Dome Light Delay/Theater Lighting Programming
The system can be programed to delay arming after the lock button is pressed (60
second max) for vehicles with a dome light delay or theater dimming feature. Once
programed the system will ‘learn’ the timing of the dome light delay and add 2 seconds
before arming.
1. Close all doors with ignition off.
2. Using the transmitter press LOCK, UNLOCK, LOCK ,UNLOCK, LOCK ,
UNLOCK, LOCK. The LED will light solid to indicate the system has entered
DOME DELAY LEARN MODE.
3. Immediately OPEN then CLOSE the door WITHOUT disarming the system.
The system will then monitor the door trigger wire. Once the dome light turns
off, the system will then add 2 seconds and then exit the learning mode.
4. The LED will begin to ash indicating the system has exited the learning mode
and is now armed.