User's Manual
42 2014 VOXX Electronics Corporation. All rights reserved.
ADDITIONAL FEATURES
Arm System with Shock Senor Bypassed (Aftermarket TX only)
1. Press Lock button to arm system
2. Within 5 seconds press the Trunk OR Find/Panic button. Parking Lights/Horn
will ash/chirp 2 times.
AttemptedIntrusionIdentication
Pressing UNLOCK after a full 30 second trigger cycle has completed, the horn will honk
4 times and the LED will ash a number of times to indicate which input triggered the
alarm. Turning on the ignition or pressing the valet/override button will reset the LED
ashes, pressing the valet/override button will also honk the horn to match the LED
ashes before it is reset.
Number of ashes:
1 - Interior Theft Sensor (Shock Sensor)
2 - Door Input
3 - Hood Input
4 - Trunk Input
5 - Ignition
Valet Mode - Consumer Modes Only
To engage valet mode:
1. Turn the ignition key ON.
2. Press and hold the valet button until the LED status light turns on solid
indicating that the system is in valet mode.
3. Release the valet button.
4. When valet mode is activated all security functions will be disabled.
To disengage valet mode:
1. Turn the ignition key ON.
2. Press and hold the valet button until the LED status light turns off indicating
that the system has exited valet mode.
DeletingArm/Disarmnoticationchirps
1. Turn the ignition ON then OFF.
2. Press and release the valet button 3 times. The system will respond with 1
chirp for ON or 2 chirps for OFF.