User's Manual

35PROPLME Install Guide rev A.
ACCESSORY CONNECTORS
6 Pin LED / Override Pod
The status LED / override button should be mounted in a visible and easily accessible
location on the driver’s dashboard area. Route the harness and plug the 6 pin connector
into the module.
4 Pin Telematic Port
This 4 pin port is used for connecting the telematic accessories such as Car Connection,
CarLink, or PursuiTrak.
4 Pin DBI - Data Bus Interface Port
This 4 pin port is used for Flashlogic Door Lock and Transponder Databus Interfaces
to communicate with the vehicle’s Databus. When using the DBI port to control the
Flashlogic Door Lock and Transponder Interface modules the following options may be
available. Please refer to the D2D (Data to Data) function list available per vehicle on the
tech service web site.
Door Trigger Trunk/Hatch Open
Keyless Entry Control Dome Light Supervision
Factory Alarm Arm / Disarm Manual Arm / Disarm Inputs (factory
keyless controls system)