User's Manual

21PROPLME Install Guide rev A.
7 RED / WHITE 12 Volt Battery Input ( + )
Locate 1 of the vehicle’s constant 12 Volt battery wires at the ignition switch.
Verication:This wire will register voltage in all positions of the ignition switch.
Connect the RED/WHITE wire to the constant 12 Volt battery wire.
NOTE: Remove the in-line fuse until all connections are made.
8 ORANGE Armed Output ( - ) 500mA
This wire will show ground when the system is armed. This wire is used for controlling a
starter interrupt relay, window modules or other additional sensors.
NOTE: Can also be used as a Disarmed Output ( - ) for a normally open starter kill.
Setting must be changed in option programming.
6 PIN INPUT / OUTPUT HARNESS
2 DK. GREEN Instant Trigger Input ( - )
This wire is a ground input for an external sensor, trunk pin or secondary pin switch.
Verication:Thiswire,whenconnected,willtriggerthesecuritysystem.
3 BLACK / WHITE Horn Output ( - ) 300mA
Locate the vehicle’s horn wire at the steering column.
Verication:This wire will register at positive voltage and register ground when the
horn switch is pressed.
Connect the BLACK/WHITE wire to the vehicle’s horn wire.
1 OPEN No Wire Connection