User's Manual

19PROPLME Install Guide rev A.
8 PIN MAIN HARNESS
1 BLACK Chassis Ground Source ( - )
Connect the BLACK wire to a solid chassis ground point using a ring terminal and self
tapping screw (not supplied). Scrape away paint from the grounding point to ensure a
good connection. The recommended grounding point is a metal surface in the driver’s
side kick panel area.
NOTE: Do not ground the BLACK wire with any other vehicle components.
1
RED / BLACK2ND UNLOCK OUTPUT ( - )
2
GREEN UNLOCK OUTPUT ( - )
3
REDLOCK OUTPUT ( - )
3 PIN
LOCK
86
ORANGE ARMED OUTPUT ( - )
85
REDIGNITION ( + )
87a
BLACKSTA RTER OUTPUT - MOTOR SIDE
87
WHITE / BLACK STARTER OUTPUT - KEY SIDE
STARTER
INTERUPT
RELAY
3 PIN LOCK HARNESS
STARTER INTERRUPT HARNESS
2 YELLOW Ignition ( + )
Locate the vehicle’s ignition wire at the ignition switch.
 Verication:This wire registers voltage when the key is turned to the ON (or
RUN) position. The voltage does not drop out when the key is turned to the START
(or CRANK) position.
Connect the YELLOW wire to the vehicle’s Ignition wire.