User's Manual

Transitioning into Consumer Mode

1. Open a vehicle door.

2. Press and hold button 2 of the short range transmitter until the system chirps

3 times.

3. Again press and hold button 2 of the short range transmitter until the system

chirps 3 times.

4. Within 5 seconds program a consumer remote. If no remotes are programmed

in the 5 second window, the system will default to the factory keyless upgrade

setting which uses the factory remote controls to arm and disarm the system.

Notes:

• Programming features 1-4 will be defaulted to the factory default settings,

programming features 5-13 will retain any changes that have been made.

Entering into Lot Mode from any Consumer Mode

1. Turn the ignition ON.

2. Press and release the override button 3 times, the system will chirp 1 time.

3. Press button 1 of the short range transmitter, the system will chirp 1 time.

4. Turn the ignition OFF to exit transmitter programming.

5. The system will chirp 2 times to conrm exit.

Notes:

• This system has 1 button programming which programs all channels of the

transmitter to the system at once.

• When in lot mode, a consumer remote can not be programmed to the system

until it is transitioned to consumer mode.

• All programming features will be defaulted to the factory default settings.

TRANSITIONING BETWEEN MODES - SHORT RANGE

TRANSMITTER