User's Manual

15PROPLME Install Guide rev A.
Yellow Mode - No-Sale
1. Open a vehicle door.
2. Enter the vehicle number into an ACM keypad.
3. Press the UNLOCK button.
4. Press and release the TRANS button.
5. Press and release the “YELLOW” button.
6. Close the vehicle’s door.
Notes:
• The ACM keypad must be authorized for transitioning.
• No-Sale mode disables all functionality of the unit and requires a programming
jig to recover the module from this mode. This mode is typically only used
when there is a no-sale of the product and you are not removing the system
from the vehicle.
Purple Mode - B.C.A. Borrowed Car Agreement
1. Open a vehicle door.
2. Enter the vehicle number into an ACM keypad.
3. Press the UNLOCK button.
4. Press and release the TRANS button.
5. Press and release the “PURPLE” button.
6. Close the vehicle’s door.
Notes:
• The ACM keypad must be authorized for BCA transitioning.
• Lot Mode and puts the Lot Mode feature into a “valet” status to allow an
extended driving period for the customer. Note that the is still in Lot Mode.
Exit B.C.A. Mode
Exiting B.C.A. Mode returns the unit to an active Lot Mode state with the original vehicle
stock number entered when Lot Mode was activated.
1. Open a vehicle door.
2. Turn ON the vehicle’s ignition.
3. Press and Hold the valet button for 3 seconds. The unit will exit BCA Mode.