User's Manual

14 2014 VOXX Electronics Corporation. All rights reserved.
Green Mode - I.T.S. Interior Theft Sensor
1. Open a vehicle door.
2. Enter the vehicle number into an ACM keypad.
3. Press the UNLOCK button.
4. Press and release the TRANS button.
5. Press and release the “GREEN” button.
6. Close the vehicle’s door.
Notes:
• The ACM keypad must be authorized for transitioning.
• I.T.S. mode enables the shock sensor only of this device for applications in a
vehicle equipped with a factory security system.
Red Mode - Remote Vehicle Security & Keyless Entry
1. Open a vehicle door.
2. Enter the vehicle number into an ACM keypad.
3. Press the UNLOCK button.
4. Press and release the TRANS button.
5. Press and release the “RED” button.
6. The LED will ash red 1 time and the system will chirp 3 times.
7. Within 5 seconds program the aftermarket transmitter by pressing the lock but
ton of each transmitter you wish to program.
8. Close the vehicle’s door.
Notes:
• The ACM keypad must be authorized for transitioning.
• If no remotes are programmed during step 7, the system will automatically
transition into the Factory Keyless Entry Security Upgrade Mode - BLUE
• Security with Transmitters Mode enables all of the device’s security
functionality by use of aftermarket transmitters.