User's Manual

13PROPLME Install Guide rev A.
Entering into Lot Mode from any Consumer Mode
1. Turn the ignition ON.
2. Press and release the override button 3 times, the system will chirp 1 time.
3. Enter the desired VEHICLE NUMBER into the ACM keypad and then press the
LOCK button.
4. The system will respond with 1 chirp.
5. Turn the ignition OFF to exit transmitter programming, the system will chirp 2
times to conrm exit.
Notes:
• This system has 1 button programming which programs all channels of the
transmitter to the system at once.
• Use of an ACM keypad is required.
• Once an ACM keypad is programmed to the system, it is automatically
transitioned into Lot Mode. Only 1 vehicle number may be learned to the
system.
• When in lot mode, a consumer remote can not be programmed to the system
until it is transitioned to consumer mode.
• All programming features will be defaulted to the factory default settings.
TRANSITIONING BETWEEN MODES - ACM KEYPAD
Blue Mode - Keyless Entry Security Upgrade
1. Open a vehicle door.
2. Enter the vehicle number into an ACM keypad.
3. Press the UNLOCK button.
4. Press and release the TRANS button.
5. Press and release the “BLUE” button.
6. The LED will ash blue 1 time and the system will chirp 3 times.
7. Close the vehicle’s door.
Notes:
• The ACM keypad must be authorized for transitioning.
• Factory Keyless Upgrade Mode enables all of the device’s security
functionality and utilizes the factory remote transmitters.