User's Manual

11PROPLME Install Guide rev A.
Programming Notes:
• The system will remain in programming mode as long as the ignition is on, there is no time limit. To exit
programming turn the IGNITION OFF.
• Changing feature #11 to either of the “ITS Functionality” settings will change the functionality of the entire
system, refer to the “I.T.S. - Interior Theft Sensor Functionality” section of this manual for details.
• Default setting are listed in BOLD.
Lot Mode - Feature Programming Banks
Feature Bank 2
Lot Mode Security Control
1 LED Flash 2 LED flash 3 LED Flash 4 LED Flash
1Security Function ON
OFF
ON - Warn
Away Disabled
2Passive Locks
Passi ve
Active
3Silent ChoiceON
OFF
4Passive/Active Arming
Passi ve
Active
5Siren/Horn Siren
Horn
6Door Trigger Delay
Instant
15 Second
7Arm 2 Input PolarityNegative ( - )
Positive ( + )
8ChirpsON
OFF
ON - Including
ITS Mode
9Door Lock Output Timing
0.9 Seconds
3 Seconds
0.9 Sec / Dbl
Pulse Unlock
0.75 Seconds
10 Ignition Controlled Door Locks ALLLock Only Unlock Only
OFF
11 DK BLUE Wire Output
Trunk
ITS Function
ITS Function -
Warn Away
Disabled
12 Disarm 2 Input PolarityNegative ( - )
Positive ( + )
13 Horn Output Timing
10mS
16mS 40mS 72mS
14 Real Panic Sound ON
OFF
15 ORANGE Wire Output
( - ) Armed
Output
( - ) Disarmed
Output
16 Arming Delay
OFF
45 Seconds
Factory R/S
Option
17 GREEN /WHITE Wire Output
Illuminated
Entry
Factory Disarm
18 Lot Alert
OFF
ON
19
Lot Mode Passive Arming Ti mers
TX Disarm / Ignition
5 / 30 minute
1 / 1 minute
Feature Bank 1
Transm itter Programming